AVL Fuel Mass Flow Meter & AVL Temperature ControlThe Fuel Mass Flow Meter and Fuel Temperature Control combined are used for continuous fuel consumption measurement on engine test beds and chassis dynamometers in research, development and production. The mass flow rate is determined direct, with continuous Measurement and extreme accuracy over very short measurement times.
The measurement system with its integrated statistical evaluation method is primarily used on steady-state test beds for reducing test times and for cycle measurements on transient, dynamic test beds, chassis dynamometers and oil test rigs with long test times.
![]() |
- Avoidance of additional costs for ISO9001 thanks to optional built-in calibration unit
- Reduction of test-bed downtime due to simple and flexible integration into the test-bed environment
- Fast attaining of development targets due to shorter measurement times and provided realistic test conditions (behaviour of vehicle tank important for diesel application) like in the vehicle (pressure, temperature)
- The injection system is uninfluenced by e.g. fuel pressure increase
- No impact of the injection system to the measurement system e.g. by pressure pulsations or volume expansion in the measurement circuit
|
- Recommended measuring range: 0...125 kg/h, 0...165 l/h (at 0,75 g/cm³)
- Systematic measurement uncertainty: Us ≤ 0,12%
- Temperature control range: 10 ... 80°C (optional -30 ... 80°C)
- Optional Heating: 1,6 kW
- Setpoint/actual value deviation: <1°C
- Temperature stability: ±0,02°C
- Dimensions: 770 x 1630 x 345 (W x H x D)
- Weight: approx. 160 kg
|
|
|
|