BMW, D. Suckart

Modelling of Flame-Wall Interactions using a Level-Set Based Flamelet Approach
Graz, AVL International Simulation Conference 2017

 

BMW, A. Friedrich

Automated Intake System Optimization for High Performance Engines

Augsburg, AVL User Conference 2014

 

BMW, D. Suckart

Internal Combustion Analysis using Flame Tracking Particle Model

Augsburg, AVL User Conference 2014

 

BMW, A. Friedrich

Automated Intake Port Optimization of a High Performance Naturally Aspired ICE

Graz, AVL User User Conference 2013

 

BMW, A. Friedrich

Crankcase Flow of a 4 Cylinder In-line IC Engine

Graz, AVL User Conference 2011

 

Bosch, D. Mayer

Analyzing Wall Heat Transfer Modeling in Diesel Engines Supporting Numerical Investigations of Strategies for Increasing Thermal Efficiency
Graz, AVL International Simulation Conference 2017

 

Bosch, F. Köpple

A Novel CFD Approach for an Improved Prediction of Particulate Emissions in GDI Engines by Considering the Varying Piston Surface Temperature

Graz, AVL User Conference 2015

 

Bosch, D. Weber

Numerical Analysis of Flash Boiling in Gasoline Direct Injection Engines

Augsburg, AVL User Conference 2014

 

Bosch, P. Jochmann

Towards the Optimization of a Boosted 2-Cylinder SI-Engine: A CFD Study with a Full Engine Model at a Scavenging Operation Point

Graz, AVL User Conference 2013

 

Bosch, F. Köpple

Investigation of the Potentials of the Numerical Simulation for Predicting the Particulate Emissions in Gasoline Engines with Direct Injection

Graz, AVL User Conference 2013

 

Bosch, J. Luo

CFD-based SCR system optimization

Jinan, AVL User Conference 2012

 

Bosch, C. Thulfaut

Simulation of Soot-in-oil Contamination: The Influence of the Piston Bowl Shape

Graz, AVL User Conference 2011

 

Bosch, N. Müller

Simulation of Ignition and Combustion in a Spark-ignited Gasoline Engine with AKTIM and ECFM Models

Graz, AVL User Conference 2011

 

Bosch, I. Orlandini

Application of 3D-CFD Simulations in the Development of Spark Plugs

SAE Paper, 2009

 

CATRA, G. Scharrer

Enhancements of a High-Performance CFD-DEM coupled Code towards Heat and Mass Transfer in Pharmaceutical Application

Graz, AVL User Conference 2015

 

Chery, G. Liu

Classic Examples of CFD Application in Engine Performance and Combustion System Study
Jinan, AVL User Conference 2012

 

Chery, Y. Xu

CFD Study of Turbocharge Engine with Catalyst

Kunming, AVL User Conference 2011

 

CNR, L. Allocca

Study of the Portability of a 3D CFD Model for the Dynamics of Sprays Issuing from Multi-Hole GDI Injectors

SAE Paper, 2011

 

CNR, H. Maier

The AVL FIRE® Code for the Optimization of GDI Engines Performance: Cyclic Variability, Knock Occurrence, PM Formation

Graz, AVL User Conference 2015

 

CNR, M. Costa

CFD Optimization of the Mixture Formation Process in a GDI Engine Working under Lean Conditions

Graz, AVL User Conference 2013

 

CNR, M. Costa

Coupling AVL FIRE® with Optimization Tools for GDI Spray Model Tuning and Enhancement of the Engine Performances

Graz, AVL User Conference 2011

 

CNR, U. Sorge

An Optimization Approach of the Control Strategy in a Diesel Engine to Reduce Fuel Consumption, Noxious Emissions and Radiated Noise

Graz, AVL User Conference 2011

 

CNR Istituto Motori, M. Costa

Multiple Injection in a Mixed Mode GDI Boosted Engine

SAE Paper, 2010

 

CNR Istituto Motori, A. Montanaro

Simultaneous Shadowgraph/Mie Scattering Imaging of Liquid and Vapor Phases of Diesel Sprays and Validation of a Numerical Model

SAE Paper, 2014

 

CNR Istituto Motori, M. Costa

Assessment of a Numerical Model for Multi-Hole Gasoline Sprays to be Employed in the Simulation of Spark Ignition GDI Engines with a Jet-Guided Combustion Mode

SAE Paper, 2009

 

CNR Istituto Motori, M. Costa

Numerical Study of a GDI Engine Operating in the Jet Guided Combustion Mode

SAE Paper, 2009

 

CNR Istituto Motori, D. Siano

Reducing Fuel Consumption, Noxious Emissions and Radiated Noise by Selection of the Optimal Control Strategy of a Diesel Engine

SAE Paper, 2011

 

Continental, L. Passilly

Thermodynamic Analysis with Various Compression Ratios in Direct Injection Diesel Engines

Graz, AVL User Conference 2015

 

Continental, E. Celik

Modeling of the Air Fuel Mixing and Flame Lift-off of a Diesel Spray

Graz, AVL User Conference 2015

 

Continental, F. Atzler

Multiple Injection and Rate Shaping Part 2: Emissions Reduction in Passenger Car Diesel Engines Computational Investigation

SAE Paper, 2009

 

Scania, D. Konstanzer

Multi-phase Modelling for Diesel Injector Development

Graz, AVL User Conference 2011

 

Denso, Y. Nishijima

RCM/Gas Engine Simulation

Tokyo, AVL User Conference 2012

 

Denso, K. Ishida

Li-Ion Battery Analysis and Cell Temperature Prediction

Tokyo, AVL User Conference 2012

 

Denso, M. Mashida

Diesel Nozzle Flow Simulation Analysis

Tokyo, AVL User Conference 2010

 

Dongfeng Commercial, H. Yu

The Simulation and Experiment Research on Low-Temperature Combustion of a Heavy-Duty Diesel Engine

Chongqing City, AVL User Conference 2014

 

Dongfeng Commercial, Y. Zhao

Simulation and Experimental Study of High and Low Pressure EGR System for Diesel Engine

Guilin, AVL User Conference 2013

 

Emitec, E. Zienicke

Compact Catalyst Design Development based on CFD Simulation

Augsburg, AVL User Conference 2014

 

FAW, L. Yang

Flow in Control Valve of Common Rail Injector Based on Cavitation

Chongqing City, AVL User Conference 2014

 

Fiat Chrysler, C. Pecollo

Thermal Analysis of a 4 Cylinder GDI Engine

Graz, AVL User Conference 2015

 

Ford, J. Jan

Development and Validation of CFD Methodology to Simulate Water Quenching Process

Plymouth, AVL User Conference 2014

 

Ford, B. S. AbdulNour

Computational Fluid Dynamics Analysis of the Flow in an APCVD Applicator System

SAE Paper, 1995

 

Ford Otosan, A. Kaynar

CFD Analysis of Water Quench Cooling Process for Cylinder Heads and Blocks

Graz, AVL User Conference 2013

 

Foton, L. Li

Optimization of Intake Port Design and In-Cylinder Charge Motion Analysis using CFD Simulation

Chongqing City, AVL User Conference 2014

 

Geely, P. Zhang

Gasoline Exhaust Manifold Design Based on 1D/3D Coupled Analysis

Chongqing City, AVL User Conference 2014

 

Geely, F. Yuan

CFD Based Spray Parameter Analysis for GDI Engine

Guilin, AVL User Conference 2013

 

Geely, C. Wang

Effect of Two-step Variable Valve Lift on Vehicle Fuel Economy

Guilin, AVL User Conference 2013

 

Geely, X. Su

CFD Study of Two-Staged Catalyst for a Turbocharged Engine

Jinan, AVL User Conference 2012

 

Great Wall, S. Yi

Optimization of EGR Pipe Layout in Intake Manifold for a Diesel Engine Based on CFD

Guilin, AVL User Conference 2013

 

Great Wall, H. Guang

Influence of Valve Lift for In-Cylinder Flow

Jinan, AVL User Conference 2012

 

Great Wall, Z. Xu

3D Simulation and Calibration of Multi-hole GDI injector

Kunming, AVL User Conference 2011

 

Great Wall, G. Liu

CAE for Development of a GWM Diesel Engine with VGT

Graz, AVL User Conference 2011

 

Great Wall, F. Wang

HC Emission Study of Cold Starting in PFI Engine

Kunming, AVL User Conference 2011

 

HJS Emission Technology, A. Khibit

Optimization of Urea System for SCR Application

Heidelberg, AVL User Conference 2012

 

Hyundai, K. Lee

Application to the Automotive Powertrain Development using AST Software Focused on Engine and Aftertreatment System

Graz, AVL User Conference 2011

 

Hyundai Heavy Industries, Y. Lee

A Study on Efficiency Improvements of a Lean Burn Gas Engine

Graz, AVL User Conference 2013

 

Hyundai Heavy Industries, Y. Lee

Efficiency Improvements and Analysis of a Lean Burn Gas Engine

Seoul, AVL User Conference 2012

 

Hyundai Heavy Industries, H. Park

Numerical Study of Cavitation in Fuel Injection Pump of Marine Diesel Engine

Seoul, AVL User Conference 2010

 

Hyundai Motors, K. Lee

Optimization of PM Sensor Location to Satisfy OBD-II Using CFD

Seoul, AVL User Conference 2014

 

Hyundai Motors, K. Lee

Automotive Powertrain Development using AVL Simulation Software

Seoul, AVL User Conference 2012

 

JAC, W. Yao

Application of In-Cylinder Combustion Simulation in GDI Engine Design

Kunming, AVL User Conference 2011

 

JAC, C. Zhang

CFD Study of Cooling Jacket for a Gasoline Engine

Jinan, AVL User Conference 2012

 

John Deere, P. Wynthien

Providing Advanced Products and Services to Support the Success of Those Linked to the Land

Graz, AVL International Simulation Conference 2017

 

John Deere, I. Sharma

SCR CFD Correlation Experiences with FTIR Data using Advanced Methods

Graz, AVL International Simulation Conference 2017

 

JMC, X. Zeng

The Development of JMC Engine Simulation Platform and its Applications

Graz, AVL User Conference 2015

 

Keihin, T. Sato

Nozzle Flow Simulation and Injection Hole Geometry Analysis

Tokyo, AVL User Conference 2010

 

Kirloskar Oil, P. Kamat

Effects of Combustion System Parameters on DI Diesel Engine Performance and Exhaust Emissions

SAE Paper, 2013

 

Kirloskar Oil, S. Sheikh

Piston Cavity Optimization for a DI Diesel Engine using AVL FIRE® ESE Diesel

Graz, AVL User Conference 2011

 

LADA, D. Tsepov

A Practical Tool for Estimation of Vehicle Side Window and Side Mirror Soiling using AVL FIRE™

Graz, AVL International Simulation Conference 2017

 

MAN Truck, W. Bauer

The Role of CFD in Virtual Engine Development

Graz, AVL User Conference 2015

 

MAN Truck, W. Bauer

Deployment of CFD Simulation Technology in Virtual Engine Development Process

Augsburg, AVL User Conference 2014

 

MAN Truck, W. Bauer

Demonstration of Multi-Disciplinary Simulation Analysis in Hand an EGR Case Study

Heidelberg, AVL User Conference 2012

 

MAN Truck, W. Bauer

Quality Intensification of 3D Combustion Simulation by Optimization of Parameters

Graz, AVL User Conference 2011

 

NAIS, A. Siliato

A Methodology for the Optimization of Spray Pattern of GDI Engines

Graz, AVL International Simulation Conference 2017

 

Nemak, B. Stauder

Integrated Quenching and Residual Stress Simulation Using FIRE

Graz, AVL User Conference 2013

 

PATAC, K. Chen

Analysis of O2 Sensor Position and AFR Imbalance Effect on TWC Performance

Graz, AVL International Simulation Conference 2017

 

PATAC, Y. Wang

Simulation Analysis of Crankcase Ventilation System

Chongqing City, AVL User Conference 2014

 

PATAC, M. Pei

3D CFD Study of Homogeneous Direct Injected Gasoline Engine

Jinan, AVL User Conference 2012

 

PATAC, Y. Wang

Oxygen Sensor Location Optimization with CFD Method

Jinan, AVL User Conference 2012

 

PSA, O. Davodet

Intake Port Flow Simulation

Graz, AVL International Simulation Conference 2017

 

PSA, J. Houstin

1D / 3D Coupling Simulations for EGR Distribution in the Cylinder

Graz, AVL User Conference 2015

 

PSA, M. Chauvy

Pollutant Emission Optimization for Diesel Engines

Graz, AVL User Conference 2015

 

PSA, L. Duchamp de Lageneste

Towards a Numerical Workflow for Pre-dimensioning Automotive Combustion Systems

Graz, AVL User Conference 2011

 

PSA, J. Daumas

Application of AVL FIRE® to the Oil Quenching of Gearbox Components

Graz, AVL User Conference 2011

 

PSA, N. Fouquet

3D Modeling of a PEM Fuel Cell with AVL FIRE®

Graz, AVL User Conference 2011

 

PSA, M. Yagoubi

Evolutionary Optimization of 3D Diesel Combustion Models

Graz, AVL User Conference 2011

 

PSA, M. Chauvy

SCR Modeling to Characterize Exhaust Lines

Graz, AVL User Conference 2011

 

PSA, O. Davodet

Using Detailed Chemistry for Modeling Combustion in Automotive Engines

Graz, AVL User Conference 2013

 

PSA, R. Lebas

Coupling Vaporization Model with the Eulerian-Lagrangian Spray Atomization (ELSA) Model in Diesel Engine Conditions

SAE Paper, 2005

 

PSA, T. Georjon

Characteristics of Mixture Formation and Combustion in a Spray-Guided Concept Gasoline Direct Injection Engine: An Experimental and Numerical Approach

SAE Paper, 2000

 

Voest Alpine, D. Piazzullo

Detailed Heat Transfer Modelling & Optimization of a Forced-Convection Kiln using CFD Methods

Graz, AVL User Conference 2015

 

RCPE, G. Scharrer

Coupled CFD-DEM Simulations for Granular Systems in Pharmaceutical Application

Graz, AVL User Conference 2013

 

Sage Physics, C. Arnold

Lesson Learned in Combustion Simulations with AVL FIRE

Plymouth, AVL User Conference 2010

 

Scania, M. Carlsson

3D CFD Simulation of Oil and Gas Flow Across a 2-piece Piston Oil Control Ring

Graz, AVL User Conference 2015

 

Scania, E. Baudoin

Design of Experiment for Piston Bowl Shape Investigation in a Heavy Duty Diesel Engine

Graz, AVL User Conference 2013

 

Scania, E. Baudoin

Use of AVL FIRE for Combustion Optimization

Göteborg, AVL User Conference 2012

 

Scania, D. Konstanzer

Applied CFD to Characterize Ad-Blue Injection Concepts

Göteborg, AVL User Conference 2012

 

Scania, P. Stralin

Effects of Injection Timing on the Conditions at Top Dead Center for Direct Injected HCCI

SAE Paper, 2003

 

Schnell Motoren, M. Blankmeister

Combustion Analysis of a Pilot Injection Engine in CHP for Biogas Plants

Graz, AVL User Conference 2011

 

Sinotruk Ltd., W.Sun

Model Based Study of the Urea Injector's Effects on SCR of an 11 Liter Diesel Engine

SAE Paper, 2014

 

Tokyo Gas, H. Ryuzaki

Experimental and Numerical Investigation of Premixed Flame Propagation in Confined Combustion Chamber Tokyo, AVL User Conference 2010

 

Toyota, T. Fuyuto

Factor Simulation of Diesel Combustion and Emission

Tokyo, AVL User Conference 2012

 

Weichai Power, J. Liu

Valve Timing and Cam Profile Optimization of Turbocharged and Intercooled Diesel Engine

Chongqing City, AVL User Conference 2014

 

Wuxi, F. Peng

Simulation of Cylinder-to-Cylinder EGR Homogeneous and Structure Optimization of Diesel Engine

Jinan, AVL User Conference 2012

 

Wuxi, L. Guo

Simulation Analysis on Spray Characteristics Effected by Injector Structure

Kunming, AVL User Conference 2011

 

Yanmar, R. Kobayashi

Influence of Exhaust System Layout on SCR Device for Mid-Range

Tokyo, AVL User Conference 2014

 

Yanmar, D. Tanaka

Optimization of GDI Spray by Nozzle Flow Simulation

Tokyo, AVL User Conference 2014