AVL is the world's largest independent company for the development, simulation and testing of powertrain systems.
The need for CO₂ reduction, the increasing complexity of new powertrain systems, and a requirement to achieve the highest possible level of process efficiency - along with the need to quickly launch new models - are some of the key challenges facing the automotive industry now and for the foreseeable future.
AVL designs and develops e-drive solutions which are tailored to your specific applications, including hybrids, e-vehicles or auxiliaries. We have over 15 years of experience under our belts in hybrid and e-vehicle development and have a profound knowledge of e-drive and actuators. Challenges: To reach a zero-emission mobility the electrification of vehicle powertrains will be necessary. This fact leads to new challenges for car makers and suppliers: How to make powertrain component more efficient to extend the range & reduce the charging time? How to combine compact and lightweight construction of high-power electronics under considering of passenger security? How to fit new technologies like SiC for e-Drive applications to extend functionality and maximize the performance? How to ensure safe operation in every environmental condition and for all areas of application? How to achieve a faster market entrance by efficient development? AVL offers a range of services for e-drives: Concepts – from the simulation of electric systems to the prototype Series development – design, simulation, integration, testing and verification Component development - motors, generators, power electronics and actuators E-Drive Software development for electronics EMC design and simulation Testing and validation of performance, functionality and EMC Electrification of auxiliary systems and accessories Solutions We develop single e-components but also integrated e-Drives for electric powertrains on every application of use. The AVL Abilities Methodologies & Engineering Know-How of the powertrain system integration to increase the system efficiency Enhancing the development of products and technologies through the interaction of computer-aided engineering tools to exploit feasibility Improvement loop of technical hardware innovations including the combination of hardware and software to perform high efficiency in power electronics System validation and durability tests performed by AVL’s high tech test benches Proprietary development & validation as well as cooperation with leading suppliers Your Benefits AVL designs, develops, integrates and tests your specific e-drive solution and can take it all the way to series development. Key features include: Optimal technology for your requirements: PMSM, ASM, SRM, BLDC, linear drives Electromagnetic compatibility (EMC) of all components Frontloading with innovative simulation technologies
GNSS signals (for example GPS signals) are of major importance for positioning and tracking, orientation and safety-related information, such as congestion, in road traffic. A collaboration between AVL and Rohde & Schwarz, two of the world’s leading providers of measuring and automotive testing systems, now permits the reproduction of realistic GNSS reception conditions for testbed vehicle testing. As a result, users can reliably test all aspects of GNSS-based vehicle positioning – a core functionality of autonomous vehicles. AVL DRIVINGCUBE™ enables the reproducible testing of driver assistance systems and driving features for self-driving vehicles using a real vehicle within a virtual environment in a variety of different traffic situations. For that purpose, test drives are performed with a real, ready-to-drive vehicle on a chassis dynamometer or powertrain testbed. With the help of realistic virtual driving scenarios it is possible to test peripheral sensors, control systems and actuators inside the vehicle in a fully reproducible and reliable manner. Automated vehicle functions are thus sufficiently validated during development and even before testing on the proving ground. The range of environment simulations carried out with AVL DRIVINGCUBE™ can now be extended to include GNSS signals, bringing simulation closer to reality than ever before. The vehicle’s GNSS receiver (e.g. GPS) is stimulated realistically using GNSS signals generated on the testbed. This way, technical engineers can identify exactly how sensors, automated driving features and other actuators respond inside the vehicle. The now possible GNSS-based vehicle positioning feature is a core functionality of automated driving, and the approach ensures that it is reliably tested. For generating GNSS signals, Rohde & Schwarz GNSS stimulators are used (R&S®SMBV100B or R&S®SMW200A), which allow the generation of signals for all of the available satellite navigation systems (GPS, Glonass, Galileo, BeiDou, QZSS, SBAS) across all frequency bandwidths (L1, L2, L5). This also makes them suitable for testing multi-frequency receivers, which are playing an increasingly important role in automated driving. Solution with added value “In Rohde & Schwarz, we now have a strong and reliable partner for GNSS stimulation. By generating consistent GNSS signals in connection with environment simulation, AVL DRIVINGCUBE™ now provides a test system that allows users to validate GNSS-based driver assistance systems and autonomous driving features,” explains Dr.-Ing. Tobias Düser, Head of Advanced Solution Lab at AVL Deutschland GmbH. Christoph Pointner, Head of Signal Generators at Rohde & Schwarz, adds: “We are very pleased to bring our expertise in the field of signal generation to this collaboration with AVL and contribute to such an important innovation and trendsetting solution for testing automatized driving features.” The additional GNSS stimulation makes testbed testing not only more realistic, it is above all a further step in moving testing from the road to the rig. This leads to a much sharper reduction of test drives than was the case previously and major savings in the kilometers driven. A flexible system easily integrated Rohde & Schwarz GNSS stimulators form a flexible, modular system that can be adapted to your requirements and is easily integrated in the AVL DRIVINGCUBE™ environment. The stimulator is controlled automatically from the simulation platform. GNSS extensions for AVL DRIVINGCUBE™ are available with immediate effect. About Rohde & Schwarz Rohde & Schwarz is a leading supplier of solutions in the fields of test and measurement, broadcast and media, aerospace | defense | security and networks and cybersecurity. The technology group’s innovative communications, information and security products help industry and government customers ensure a safer and connected world. On June 30, 2019, Rohde & Schwarz had 12,100 employees. The independent group achieved a net revenue of EUR 2.14 billion in the 2018/2019 fiscal year (July to June). The company is headquartered in Munich, Germany, and has subsidiaries in more than 70 countries, with regional hubs in Asia and America. About AVL List GmbH AVL provides engineering services for the development, optimization and validation of all current and future ADAS/AD features, as well as instrumentation and test systems including system integration. Drawing on a global network of tech centers and experts with many years of experience, AVL is a well-established partner for its global customers. AVL is the world’s largest independent company for the development, simulation and testing of powertrain systems (hybrid, combustion engine, transmission, electric drive, batteries and software) for passenger cars, trucks and large engines. AVL has more than 10,400 employees all over the world. In 2018, sales revenues reached EUR 1.75 billion. Contact Dipl.-Ing. Michael Ksela Company Spokesman AVL Mobile: +43 664 132 81 78 E-Mail: michael.ksela@scoopandspoon.com Christian Mokry PR-Manager Rohde & Schwarz Mobile: +49 89 4129 13052 E-Mail: press@rohde-schwarz.com
At AVL we understand the importance of the availability and usability of equipment and devices throughout the product lifecycle. The delays caused by operational downtime can be extremely costly. We aim to reduce the total cost of ownership and increase the availability and accuracy of test equipment. In this way AVL Customer Services for Testing Solutions helps to avoid the unplanned costs and reduces test repetitions caused by inaccurate equipment. How we do it: Worldwide, the AVL support infrastructure consists of more than 700 service employees working in more than 50 locations. 14 Hotlines guarantee access to AVL expert help and the AVL CARE™ Service Solution manages services for more than 1400 testbeds. In addition: AVL operates more than 240 of its own testbeds at 17 different locations AVL resident teams maintain, support and operate more than 1500 testbeds at customer sites AVL assistance offers application support that can reduce testing time by more than 70% by using the right calibration methodology and infrastructure. A tailored service concept can boost utilization rates to more than 80% and technical availability to more than 97% Find out more about AVL Service Modules and AVL Managed Service Contracts.
