Ever more stringent emission legislations with new and longer test cycles, along with the growing complexity of engine and powertrain testbeds all place high demands on exhaust emission testing technology:
- Multi-step exhaust aftertreatment system analysis requires a higher number of exhaust gas sampling points. Yet the sampling volume must have no effect at all on the engine or the exhaust aftertreatment system.
- The measuring systems are part of complex testbeds with numerous test parameters, so they must be capable of effortless integration into the testbed automation system.
- The systems’ efficiency depends on highly stable operation, reliable measuring results and user-friendly servicing concepts.
- For testbed operation to be cost-efficient, maintenance requirements must be minimal and the number of costly and time-consuming test runs for each measuring task must be as low as possible.
- Due to the large number of necessary measuring systems, system operation represents a significant cost factor.
The AVL AMA SL™ is a high-end measurement device that provides you with reliable and accurate exhaust gas insights:
- Wide dynamic measurement range for up to eight exhaust gas components in one stream
- Additional calculation of the exhaust gas recirculation rate (EGR) by measuring CO2 from a second sample point
- Simultaneous measurements with one system at two sampling points, e.g. in order to assess the catalyst efficiency
- Parallel exhaust measurements at multiple sampling points for a wide range of engine sizes thanks to a 75 % reduction in exhaust sample volume, and a 90 % reduction in EGR sample volume.
| Technical Data | |||||||||||||
|
|||||||||||||
Significantly reduced noise emissions, power consumption and heat dissipation
The AVL AMA SL™ is the discreet star of the testbed and excels due to its sustainability. It requires less energy, gives off less heat and is pleasantly quiet. It can therefore also be installed in the operator room.
Risk-free internal access due to 24/48 VDC operation
Owing to extra-low voltage supply, the system is safely accessible during operation too. This allows the staff to service an analyzer, for example, while the other analyzers continue to complete their test order. Additionally, there are no country-specific designs for the system components.
Easy handling
The measuring system is automatically registered in the testbed network and integrated with just a few mouse-clicks. The AVL AMA SL™ control software is based on the powerful iGEM software platform, which works perfectly together with the AVL PUMA Open 2™ testbed automation system.
The AVL AMA SL™ has been proven to be reliable and stable and we clearly see its advantages.
– Dr. Michael Röbel - Head of Process Technology and R&D Investments, DEUTZ AG
The new benchmark for full-flow diluted emission testing is designed to take up much less space than conventional system cabinets and is built to use less energy.
The AVL iGENERATION Series II clears the way for intelligent and intuitive R&D and certification emission testing according to the latest worldwide emission regulations.
The AVL SESAM i60 FT SII is a Fourier-Transform Infra-Red exhaust gas measurement system offering evaluation methods optimized for different fuels and applications.
The AVL iCAL product line includes everything you need to accurately calibrate emission measurement devices according to the legal obligations of global markets.
Learn more about our Filter Weighing portfolio existing of Filter Weighing Chamber, Filter Weighing Robot and the tailored software tool AVL ParticleScale.
The AVL VT/VV-SHED (Sealed Housing for Evaporative Determination) systems constitute a state-of-the-art test system for testing evaporative emissions.
AVL CANLOAD is designed for the automated execution of conditioning and aging cycles of canisters containing activated carbon from the automotive sector.
AVL FUELLOAD is designed specifically for fuel conditioning and refueling procedures of vehicles or tank systems in the context of ORVR test procedures.
AVL iGEM 2™ is our cutting-edge test automation solution for your energy and emission testing needs. It delivers high-quality data for certification and R&D testing.
Achieve process safety and higher efficiency with our modular and scalable Lab Management for Vehicle solution.
AVL Process Control Modules constitute a powerful selection of software modules to assist you in all necessary steps involved in the testing process and result evaluation.
The AVL Customer Services organization consists of more than 700 service- and application engineers worldwide, operating from more than 50 locations. Our global footprint is your local benefit.
WEBINAR - The upcoming European vehicle emission standards Euro 7 publication by the European Commission will outline testing and certification updates which will need to be addressed when developing future propulsion solutions.
WEBINAR - Hydrogen has the potential to be used to facilitate the shift towards zero CO2 and zero impact pollutant emissions in transport, marine, and industrial internal combustion engine (ICE) applications.
In the coming years and decades, vehicle manufacturers and suppliers will have to face various global challenges. Reducing global warming, avoiding further greenhouse gas emission and improving local air quality will have a direct impact on relevant
In this webinar, Kurt Engeljehringer shares details of AVL’s free Emission and Energy Testing Handbook, which aims to help engineers understand and navigate this complex topic.
AVL List GmbH has appointed Gustav Tuschen as new board member and Executive Vice President. The top manager with international experience was previously at Daimler Buses, where he was head of development. As of December 1, 2022, the 60-year-old is responsible for the corporate development and global alignment of AVL in the commercial vehicles sector.