/ 73 Filter- and Valve Testbed The filter- and valve testbed from qpunkt was developed especially for filters in pressure-driven (hydraulic) flow, like oil and diesel filters. Stateof the-art control algorithms provide a simple, intuitive handling and thereby guarantee optimal processing times. APPLICATION The testbed is used in the development of new filter elements and filter components as well as during the quality assurance review within the production process. The filter and valve testbed from qpunkt covers the following tests: • Differential pressure of filters, according to customer specifications or to ISO 4548-1, BS 7403-1 and ISO 3968 • Flow behaviour, static as well as dynamic test conditions • Opening pressure of bypass valves • Leakage tests of bypass- and anti-drain valves GENERAL TECHNICAL DATA (Adjustments can be made to suit a customer’s specific needs.) Mass Flow 0-120 l/min Alteration Rate Flow Up to 100l/min/min Temperatures 0-160 °C Max. Pressure of Medium 18 bar Medium Mineral and synthetic oils, Diesel and Biodiesel DC Voltage Connection Up to 400V/32kW Due to the modular design of the testbed it can be easily adapted to meet a wide variety of customer needs, e.g. for different tests according to ISO 4548. The test procedure can be performed manually, but also fully automatized – even an automatized creation of the test protocol is possible. Application of, or coupling with, a customer specific software is also realisable. ADVANTAGES AT A GLANCE • Highest measurement accuracy through intelligent sensor wiring • Short testing periods using a high degree of automation • High customer value by being able to perform different tests on one testbed • Highly flexible – due to the modular design of the testbed it can be adjusted to meet a variety of customer needs
Solutionskatalog2016_EN
To see the actual publication please follow the link above