AVL DynoExact for Engine Testing - Load systems for Engine Testing
Load system with cradled AC induction dynamometers
AVL DynoExact for Engine Testing
More than 1,500 systems have already been installed. The dynamometer was developed by AVL under real test cell conditions.
The cradled mounted design is optimized to offer the highest accuracy during the complete machine lifetime. Lowest possible temperature influence on torque measurement due to optimal positioning of the bending beam.
The calibration range can be tuned to the customer needs. Extremely low hysteresis on torque measurement due to hydrostatic cradled bearings. Existing dynos can be upgraded with new control systems.
Benefits at a Glance
- Accurate high dynamic torque control
- Very high torque accuracy with hydrostatic bearings option
- Possibility of precise vehicle simulation in the test cell
- Possibility of torque calibration check during operation
- Possibility to recalibrate the dyno down to half of the dynamometer nominal torque to increase the torque measurement accuracy for small engines
- Robust industrial design for operation under extreme ambient and environmental conditions
- Easy installation and commissioning due to pre-commissioned components tested in a shop test
- All APA dynamometers are equipped with hydrostatic bearings
- Measurement accuracy +/- 0.1% FS
- The APA drives can accurately simulate zero inertia conditions and drivetrain oscillations (7-12 Hz) by optional high dynamic torque control