Product

Data Acquisition - AVL FEM 4™

Performance unveiled

The next generation of AVL’s data acquisition hardware for combustion, hybrid, electric and fuel cell powertrains

Video file

The increasing diversification of powertrain technologies requires an adaptive measurement solution that can be tailored to the individual application in a very short time. Such solutions need to be adapted and configured to their individual environments as quickly as possible in order to contribute to a continuous increase in testing efficiency. New powertrain technologies require a higher data throughput rate in real time. The AVL FEM 4™ enables you to measure all raw data relevant for the characterization of the unit-under-test, for example state of charge and state of health when testing batteries. 

Addressing the Challenges Faced by OEMs -
New trends resulting from the diversification currently occurring in powertrains place demands on measurement systems that conventional devices simply cannot fulfil. The future technologies used in data logging devices must provide extended measurement ranges combined with precise data logging capability and high throughput rates over a very wide spectrum of temperatures.
AVL FEM 4 represents the next generation of IO measurement systems. 

FEM 4

Direct measurement of voltages

Highest measurement accuracy

Wide operating temperature range

Adaptive modular design

High sampling and data throughput rates in real-time

 

The AVL Approach

By using modern signal conditioning and the real-time EtherCAT interface, the FEM 4 meets the demands of modern development processes. The new circuit concept enables you to control and measure signals such as currents, temperatures, frequencies and voltages directly up to 2,400 VDC without influencing the measurement signal. The measuring modules in a FEM 4 can be quickly adapted to new tasks, helping you to increase flexibility and ultimately optimize the utilization of your test facilities.

Technical Data Unit

Module size (W x H x D)

45 x 132 x 150 cm
Power supply 9 … 35 VDC
Interfaces EtherCAT, CAN
Operating temperature -40 … +80 °C
Relative humidity 20 … 80 %, non-condensing
Protection class IP20

 

FEM 4

The following benefits are essential in order to measure all data relevant for the characterization of a unit-under-test and support the continuous increase of testing efficiency:

Adaptive Modular Design

Easy and rapid connection to all kinds of powertrain technologies thanks to a cascading mechanism and frontend design.

Distributed, Resilient System

The wide temperature resilience and the distributed design of the modules enable installation in close proximity to the unit-under-test.

Highest Measurement Accuracy

Calibrated according to ISO 17025 – fewer iterations, reduced costs and increased efficiency. 

Galvanic Isolation

High galvanic isolation up to 1,500 VDC for electrified modules support a direct measurement of DC voltages up to 2,400 VDC without influencing the measurement. 

Advanced Data Communication

High sampling and data communication in real-time, e.g. EtherCAT.

High Voltage Isolation

These modules offer a high degree of insulation of the individual connector (single channel or group of channels) for use at high voltage potentials, e.g. in electrification.

Voltage Measurement Modules

The voltage modules enable measurements at low and high voltage (HV) levels with up to 8 selectable measurement ranges depending on the module type.

Current Measurement Modules

The current measurement modules enable measurements up to ±24 mA, or up to 2,000 A with an additional ballast.

Temperature Modules

The following modules are suitable for temperature measurements. Depending on the type, the channels are individually isolated or combined into groups.

Universal Modules

In order to cover the widest possible range of applications, the following universal modules are available.

Active Modules

In addition to passive measuring modules, the FEM 4 product family also offers active control modules for signal generation.

Basis and Extension Modules

Further basic and extension modules are offered to complete the portfolio.

X-ion e-power
AVL X-ion e-Power

The AVL X-ion™ e-Power power analyzer is a modular data acquisition platform that is optimized for electric and hybrid applications.

Puma
AVL PUMA 2™ Fuel Cell

AVL PUMA 2™ Fuel Cell is our intuitive automation system for highly dynamic fuel cell system testing. It is the global industry standard for testbed automation.

PUMA 2 Inverter
AVL PUMA 2™ Inverter

AVL PUMA 2™ Inverter is a comprehensive automation system for inverter testing, offering everything you need in one place 

AVL Creators Expedition
AVL Creators Expedition receives Fraunhofer Corporate Venturing Award

AVL List GmbH has received this year's Corporate Venturing Award from Fraunhofer Institute for Production Technology. 

75 Years Special Edition of FOCUS Magazine
75 Years Special Edition of FOCUS Magazine Now Available

With captivating stories and insightful interviews, we invite you to join us as we embark on the exciting journey of AVL, diving into our rich history and envisioning the endless possibilities ahead.

AVL 75 Years
AVL 75 Years: New Brand Movie out Now

As we have been celebrating 75 years of Reimagining Motion throughout this year, we are thrilled to release our new brand movie, commemorating this remarkable milestone of technology excellence and innovation.

EcoVision Award
AVL received the Global EcoVision Award for achievements in Hungary

AVL List GmbH received the Global EcoVision Award from WKÖ in the presence of Federal Chancellor Karl Nehammer, Federal Minister Martin Kocher, and WKÖ President Harald Mahrer for the achievements in Hungary.

Reimagining Motion
AVL Mobility Accelerates Ground, Air and Space Technology

Latest projects from Northrop Grumman and Eviation presented at CES

AVL Racetech H2 Engine
AVL RACETECH Builds Hydrogen Combustion Engine for Motorsport

AVL RACETECH, the motorsport department of AVL, presents the prototype of an innovative H2 internal combustion engine. The power unit is a compact, hydrogen-powered 2-liter turbo engine, with intelligent water injection, which achieves a totally new performance level. The first racing engine that AVL RACETECH is developing and building in-house.

Image_OpeningCeremony
AVL Opens New Hydrogen and Fuel Cell Test Center in Graz

Greater test capacities for innovative energy and propulsion solutions

Do you have questions or want to work with us?


Our experts are happy to help.

You are currently on the AVL Global Site. Click below if you would like to switch to