While the selection of individual laboratory power supplies is not a big challenge, the configuration of a testbed that fully automatically controls 15 different components from different manufacturers with 60 channels for more than 1000 hours without error is much more difficult. This is why we developed the AVL Battery Cell TSTM. Whether cell cyclers for 0.5 A to 2400 A, EIS meters for 5 A or 30 A, measurement of voltage, resistance, current or a safety PLC, we deliver a test system tailored to your needs.
Perfect Planning
AVL Lab Management™ for Battery provides the perfect support for controlling several thousand channels automatically.
Fully Automated Control
A test often consists of several subareas requiring different equipment. AVL’s automation software enables various types of devices to be integrated and controlled fully automatically.
Automated Evaluation
AVL software tools offer many options for creating libraries and performing online calculations, for example, to facilitate post-processing.
Testing All Influences
AVL works alongside many chamber manufacturers and can offer all types of climatic conditions, such as temperature and humidity, as well as salt and dust, for example.
Testing Beyond Limits
To get the maximum possible performance from batteries, AVL offers a specially developed safety chamber and equips complete safety laboratories with various testing options.
The AVL Battery Cell TS™ can be adapted to a wide range of customer requirements. Typically, our battery cell test systems consist of the following subsystems:
Testbed Automation
Depending on the performance required, the AVL automation system supports up to 64 channels in real time. Moreover, our automation software enables various types of devices to be integrated and controlled fully automatically. → Learn more
Climate Chamber
We offer different chambers with and without humidity. The typical temperature range is between -40 and +90 °C. → Learn more
Cell Holder
Cell Holder and Fixture systems are designed for a variety of shapes and sizes, such as coin, prismatic, pouch, cylindrical.
Safety System
We have designed the safety system according to the expected risk level based on our cell analysis database.
Measurement Systems
Based on customer requirements additional sensors for temperature, force and displacement can be integrated.
Greatest Measurement Accuracy
To achieve the objectives of the test procedure, we have developed our products with the greatest measurement accuracy of up to 0.01% FS.
Continuous Real-Time System
Each test channel can be controlled and monitored such that an important threshold of at least 100 Hz depending on architecture is not exceeded.
Regenerative System
To keep energy costs as low as possible, every cycler at AVL is designed to be regenerative so that energy can be returned to the grid.
Global Presence
AVL is represented around the world and supports customers locally with experts on site.
We offer flexible and future-proof solutions for your cell testing challenges with configurable solutions for your individual testing needs. Our innovative approach ensures you stay ahead and achieve accurate results every time.”
– Dominik Strasser, System Line Manager, AVL List GmbH
AVL Battery Testing Solutions – Brochure
Learn more about our holistic battery testing portfolio and solutions.
AVL Cell Testing Solutions – Brochure
Master the heartbeat of the battery. From single channel to automized lab testing.
AVL Battery Cell TS™ – Solution Sheet
Exploring the limits with maximum safety.
Battery Testing: Aviation – Solution Sheet
Boost your battery test process.
Success Story – “Valmet Automotive”
Success Story – “Battery Testing for LABCO”
How AVL supported LABCO BTC in entering the world of battery development.
AVL E-Mobility Testing Solutions – Brochure
Tested and Trusted.
AVL is pioneering a novel battery cell conditioning method designed for ultra-high precision coulometry (UHPC) measurements. This innovative approach optimizes battery testing by tightly controlling thermal and electrical parameters, resulting in more accurate performance analysis.
AVL´s intuitive automation system for battery testing, from cell to module and pack.
Bi-directional multi-channel DC power supply to test and validate battery cells.
New powertrain technologies require a higher data throughput rate in real time. AVL FEM 4™ enables you to measure all raw data relevant for the characterization of the unit-under-test.
Increase the efficiency and effectiveness of your test lab.
AVL’s E-Library is a mindful solution that introduces simplicity when dealing with e-testing complexity, provides a fast track to productivity, and offers reassurance that targets will be met – putting your mind at ease and allowing you to enter the market with full confidence.
Battery packs, modules and cells, fuel cells, e-motor and e-axle solutions must operate safely and reliably in any environment. This can include extreme temperatures and humidity, which cannot be reproduced on the test track or in real test scenarios on the road. This is why we developed the modular AVL Climate Chamber.
Thermal conditions and environment of Units Under Test have strong impacts on real results in driving. For this reason, the thermal simulation must be as exact as possible – which can be achieved via deployment of high performing media conditioning systems.
To ensure that batteries deliver optimal performance over the longest possible lifetime while meeting strict safety standards, we have developed the AVL Battery TS™ End Of Line. From modules to battery packs, this test system enables battery testing in production. The system covers Conformity of Product (CoP) and Quality Assurance testing.
Explore the tools and features that make AVL LYNX™ the heart of your lab.
Battery electric vehicle (BEV) development requires significant adjustments to the development process and its environment.
- EN,
AVL List GmbH has appointed Matthias Dank as new board member and Executive Vice President (EVP). The top manager with international experience was previously at McLaren Applied, where he was Director of Motorsport.
- EN,
Latest projects from Northrop Grumman and Eviation presented at CES
- EN,
AVL RACETECH, the motorsport department of AVL, presents the prototype of an innovative H2 internal combustion engine. The power unit is a compact, hydrogen-powered 2-liter turbo engine, with intelligent water injection, which achieves a totally new performance level. The first racing engine that AVL RACETECH is developing and building in-house.
- EN,
- EN,
Up to 60 Percent Shorter Test Duration thanks to Direct Cooling and Automation