AVL Transmission TS™

The test system (TS) to optimize your transmission.
Header

The increasing complexity of modern propulsion systems is placing increasing demands on the instrumentation and test systems. Parallel development activities of key propulsion system components (ICE, hybrid engine, e-drive, transmission, etc.) require transmission testing to be performed at the earliest possible stage. AVL Transmission TS™ is designed to help you manage the validation of any transmission throughout the development process. We have longstanding experience in the development of transmission test systems for passenger cars, light-duty and heavy-duty trucks, busses, tractors, and off-road vehicles. We provide solutions where the original propulsion unit is replaced by a suitable AVL drive unit. These solutions can be applied to a wide range of applications, e.g. durability, functionality, performance, and NVH. 

OEMs and suppliers are developing components and systems for new propulsion system concepts. In the past, the requirements for an AVL drive unit were framed by the data for ICEs. With the shift to pure electrified propulsion systems, our drive must also cover the data for e-drives. This means a smaller size with high power density, higher speeds, and more flexibility and variants in e-motor design compared with the ICE.

History

Our modern transmission test systems are built to validate any kind of transmission with different types, speeds, torques, and power classes. The biggest challenge is replacing a transverse mounted ICE or e-motor in a close axle arrangement. The AVL drive unit must cover the desired speed and torque requirements, and fit into a given installation space. Our transmission test systems cover the variability of e-axles in a co-axial or offset arrangement, and the connection of e-motor to transmission with intelligent mechanical solutions. The optimized toolchain significantly reduces the duration of the design and validation process. Transmission tests can be executed in an early development phase without having a mature propulsion unit. This minimizes the risk of design changes in a later stage of the development process.

Challenge

We add even more value to the testing process with our AVL PUMA 2™ automation software, which synchronizes measurements from every device. This high level of data quality – combined with the system’s precise measurement and control and simulation capability – ensures that our customers can develop transmission systems within a reduced timespan, by performing transient tests, time lapse tests, or tests in road load simulation.

Challenge
Third Topic

AVL Transmission TS™ – Solutions for Every Requirement
Our transmission testing solutions are built on state-of-the-art and proven products that range from drive systems and load systems for different speed and power classes, to automation software that supports a wide range of applications. Our application expertise and system integration capabilities increase the efficiency of our customers. We deliver the right transmission testing solution for your needs.

  • Transmission Performance LD 
    An AVL DynoPrime as a drive unit replaces the ICE or the hybrid propulsion unit. The slim design and short length enable direct mounting to the transmission input shaft, even in a transverse axle arrangement. A powerful engine model enables simulation of the static and dynamic behavior of an ICE. Furthermore, the speed irregularity caused by combustion can also be simulated.
  • E-Transmission Performance LD
    The AVL drive unit covers the desired speed and torque requirements of the replaced e-motor, and must fit into a given installation space. The AVL solution covers the variability of e-axles in a co-axial or offset arrangement, and the connection of e-motor to transmission with intelligent mechanical solutions. An AVL DynoPrime with a slim design and a speed range of up to 20,000 rpm enable direct mounting to the transmission input shaft in a transverse layshaft axle arrangement. A solution using a matching gearbox offers more flexibility and allows e-axle replacement in a co-axial arrangement.
  • Transmission Performance HD
    The AVL drive unit covers the desired speed and torque requirements; the installation space does not need to be considered. Two, four, or more load units with a torque range up to 40,000 Nm are used. Sometimes matching transmissions are necessary to achieve the high torque requirements of the unit under test. The AVL transmission test system solutions also enable HD axle testing.
  • NVH Testing
    The acoustics of the drive unit are optimized to achieve the required noise level. Therefore, the NVH chamber is installed and coupled directly to the transmission. The load units are installed outside the NVH chamber to achieve the ambient noise.
picture of klaus pfeiffer

Nothing is more constant than change. Propulsion system architecture and components have changed dramatically in recent years. Consequently, use cases and applications have also changed. AVL has always been able to design the right solutions for our customer needs. Meaning our customers can focus on their development and trust their measurement results.”

– Dr. Klaus Pfeiffer, System Line Manager, AVL Deutschland GmbH

Learn more about the portfolio of AVL solutions
key_visul_puma_2
AVL PUMA 2™

AVL PUMA 2™ is the global industry standard for testbed automation. It is suitable for electrified testbed types as well as for conventional test environments.

AVL EMCON 6
AVL EMCON 6™

The market-leading testbed monitoring and control system for a variety of propulsion systems

Header
E-Axle Testing Solutions

At AVL, we develop e-axle solutions that can be easily installed without impacting the productivity of your engineering facility.

Header
AVL Transmission TS™

We offer transmission test systems for various test applications. 

Emission Key Visual
ICE/Hybrid Propulsion Testing

With increasingly strict emissions restrictions across the world, and demand for affordable vehicles with low fuel consumption that do not sacrifice comfort, the automotive industry is facing enormous challenges.

Customer Services
Customer Services for Testing Solutions

The AVL Customer Services organization consists of more than 700 service- and application engineers worldwide, operating from more than 50 locations. Our global footprint is your local benefit.

AVL CONCERTO 6
AVL CONCERTO 6™

Transform your e-mobility analysis with AVL CONCERTO 6™️, featuring fast data access, AI-driven technologies, advanced visualizations and calculations, and auto-generated reports for superior performance and precise insights.  

•    Evaluation of specified strain limits of the transmission case and rotating parts •    Evaluation of specified lifetime of gear teeth and bearings •    Determination of lifetime of transmission clutch pack and brake lifetimes •    Evaluation and optimization of component dimensioning •    Driving performance and strategy •    Upgrade to maneuver-based testing possible

Transmission Performance LD – typical applications: •    Transmission durability •    Performance testing •    Efficiency evaluation

E-Transmission Performance LD – typical applications: •    Transmission durability •    Performance testing •    Efficiency evaluation

Transmission Performance HD – typical applications: •    Transmission durability •    Axle durability •    Performance testing •    Efficiency evaluation

Your reliable partner in transmission testing solutions

AVL’s comprehensive worldwide network of experts allows best customer vicinity, ensuring consistent and connecting testing fields globally. Wherever your R&D challenges take you, we are always close at hand, ready to provide the service you need.

Welt red

> 70

years of experience

> 5000

employees worldwide for testing solutions

> 30

countries covered by the global network

> 7000

testbeds installed worldwide

> 80

turnkey projects