Global legislation and Real Driving Emissions (RDE) requirements are becoming stricter all the time, so automotive manufacturers need to be agile enough in their development process to accommodate these changes quickly if they want to operate on a global level. This makes keeping abreast of the changing legislative landscape and choosing the right supplier for testing solutions more important than ever.
WORLDWIDE INTRODUCTION OF RDE
As RDE has its focus on real driving situations in the addressed market, it is clear that there will be different requirements coming from different regions.
Light duty RDE testing focusses on nitrogen oxides (NOx) emissions and particle number (PN), while heavy-duty testing also includes limits for total hydrocarbons (THC) and methane (CH4), which are crucial for LPG or CNG Engines.
The upcoming Euro 7 emission regulation will raise the bar for the challenge of Real Driving Emissions (RDE) development and testing. A reduction of existing limits and “new” limits are expected such as NH3 and THC/ NMHC for Light Duty Vehicles and N2O, HCHO and NMOG for Heavy Duty Vehicles. The particle number (PN) limit will be for 10nm particles instead of 23nm.
AVL M.O.V.E iS+ System has been designed to support all the different needs of global RDE regulations and applications, including passenger car and heavy-duty truck with a single versatile system.
An evolution of the M.O.V.E portfolio, it includes state-of-the-art central data management, gaseous emission and exhaust flow measurement, particulate counting and data post-processing. Supporting low-emission vehicle development with optional features such as fuel consumption measurement, energy balance for evaluation modern hybrids, and transient soot measurement for engine-out optimization, its versatile modularity enables it to be tailored to your specific needs.
Needless to say that PEMS solutions need to be robust and scalable to cover all these aspects and also need to allow the smooth exchange of data between different testing environments to enable the most efficient RDE development process.
Systems |
Overview |
| GAS ADVANCED | Measures NO/NO2, CO/CO2 and optionally N2O with special focus on high accuracy at the low NOx range |
| FID iS+ | Measures THC and CH4 concentrations in the exhaust gas |
| M.O.V.E NH3 PEMS | Measures NH3 concentrations in the exhaust gas |
| M.O.V.E FT | Measures NH3, N2O, CH4 and HCHO and optionally CO, CO2, NO/NO2 and many others |
| PN PEMS iS / iS+ | Measures Particle number emissions [#/cm³] of solid particles under real driving conditions |
| System Control Advanced |
A robust and flexible platform for central device |
| M.O.V.E EFM |
Installed on vehicle's tailpipe for accurate measurements |
The AVL M.O.V.E FT is the first system officially accredited by the Vehicle Certification Agency (VCA) as an alternative to conventional emissions measurement technology under UN Regulation 168.
Designed for real-world emission testing, the AVL M.O.V.E FT delivers real-time, on-road emissions data with laboratory-grade accuracy - even in remote locations or under demanding environmental conditions. This compact and rugged system replaces multiple analyzers with a single, powerful solution, enabling precise measurement of CO, CO₂, and NOₓ for Euro 6e testing. It also supports extended analysis through additional gas components, offering broader insights for advanced emissions development
Ease of use, flexibility of installation, and robustness and reliability of results make this the preferred solution for both RDE certification and research and development.
Ease of Use
Flexible mounting inside or outside the vehicle. Easy integration of different devices and test execution via a central control and data logging unit. Central power supply distribution solutions support different battery technologies.
Flexibility of Installation
All aspects of RDE testing are considered including workflow support from the test preparation, test execution, data evaluation and data management.
Application-Focused Design
No influence on the vehicle under test. High accuracy and stability of the measurement results over changing ambient conditions.
Safeguarding Investment
Reasonable modularity, extendibility, and completeness – global RDE regulations (Passenger Car and Heavy-Duty Truck) are supported. Future-proof features like N2O and CH4 measurement.
Reliable Partner
AVL supports customers across the entire RDE workflow including engineering and testing services, test bed systems and portable measurement systems.
AVL M.O.V.E GAS ADVANCED
The AVL M.O.V.E Gas ADVANCED features a new Low NOx NDUV analyzer to ensure highest accuracy and a low drift at the low NOx range. With this a further reduction of the NOx measurement uncertainty is supported. The device is an alternative of the GAS PEMS iS+ and uses the same accessories.
AVL M.O.V.E FID iS+
The AVL M.O.V.E FID iS+ is a PEMS for measuring the THC and CH4 concentrations in the exhaust gas of vehicles. It is especially optimized regarding robustness for in-vehicle application, easy operation and a flexible installation.
AVL M.O.V.E NH3 PEMS
The AVL M.O.V.E NH3 PEMS uses robust laser diode spectroscopy to measure the NH3 concentration during RDE. The device has been developed to address the upcoming Euro7 requirements and is an extension of the M.O.V.E iS+ system.
AVL M.O.V.E FT
The AVL M.O.V.E FT is based on an FTIR spectrometer that simultaneously measures multiple pre-calibrated exhaust gas components. The device has been developed to address the upcoming Euro7 requirements and may be used stand alone or as an extension to a M.O.V.E iS+ system.
AVL M.O.V.E PN PEMS iS / iS+
The AVL M.O.V.E PN PEMS iS / iS+ ensures the highest reproducibility with minimal particle losses. The device continuously measures the particle number emissions [#/cm³] of solid particles under real driving conditions.
AVL M.O.V.E SYSTEM CONTROL ADVANCED
AVL M.O.V.E System Control Advanced is a next-gen platform with enhanced capabilities that simplifies calibration with integrated external ambient sensors. It is a robust, central device integration and data acquisition tool ensuring valid measurements via automated checks and workflows for PEMS and in-vehicle tests.
AVL M.O.V.E DATA TOOLBOX 2
The M.O.V.E Data Toolbox 2 is a powerful software add-on for AVL CONCERTO 6™, the AVL data post-processing platform. It supports different global “real world emission” regulations and applications.
AVL M.O.V.E EFM
The AVL M.O.V.E EFM is based on the proven and robust “differential pressure” measurement principle. It consists of the EFM tube which is installed on the tailpipe of the vehicle and the EFM control box which includes the electronics and the pressure transducers.
Customer Success Story AVL M.O.V.E HMC
Solution Sheet AVL M.O.V.E System Control Advanced
The powerful integration platform for your RDE and in-vehicle testing needs.
Solution Sheet AVL M.O.V.E GAS PEMS
Solution Sheet AVL M.O.V.E Gas Advanced
Portable emission measurement system for the upcoming Euro7 legislation.
Solution Sheet AVL M.O.V.E FID iS+
Solution Sheet AVL M.O.V.E PN PEMS iS+
ISC-compliant portable emission measurement system for particle number testing heavy duty.
Solution Sheet AVL M.O.V.E EFM
Exhaust Flow Meter
Solution Sheet AVL M.O.V.E Concerto Toolbox
Solution Sheet AVL PEMS Data Management
Solution Sheet AVL M.O.V.E Quality Station
Solution Sheet AVL M.O.V.E NH3
AVL M.O.V.E iS+ Extension - Highly accurate and robust NH3 measurement for in-vehicle application.
Solution Sheet AVL M.O.V.E FT
Multi component emission measurement system. First compact and lightweight FTIR analyzer for real driving emissions testing.
Whitepaper Upcoming Emissions Challenges
New vehicle emissions legislations in EU, China, and USA
The device is AVL’s all-in-one solution for RDE/ISC requirements. It ensures precise and reproducible emission measurements under real driving conditions.
Portable on-board soot and PM measurement device.
Transform your e-mobility analysis with AVL CONCERTO 6™, featuring fast data access, AI-driven technologies, advanced visualizations and calculations, and auto-generated reports for superior performance and precise insights.
WEBINAR - The upcoming European vehicle emission standards Euro 7 publication by the European Commission will outline testing and certification updates which will need to be addressed when developing future propulsion solutions.
As automotive emissions continue to stay in the focus of environmental regulations, OBM (On-Board Monitoring) emerges as a substantial instrument for ensuring emission compliance with EU7 standards.
The 13th International AVL Emissions and Energy Forum will take place on April 23rd and 24th in Ludwigsburg near Stuttgart, Germany. The Forum will focus on the climate-neutral energy basis for the mobility of the future.
With captivating stories and insightful interviews, we invite you to join us as we embark on the exciting journey of AVL, diving into our rich history and envisioning the endless possibilities ahead.
As we have been celebrating 75 years of Reimagining Motion throughout this year, we are thrilled to release our new brand movie, commemorating this remarkable milestone of technology excellence and innovation.
AVL List GmbH received the Global EcoVision Award from WKÖ in the presence of Federal Chancellor Karl Nehammer, Federal Minister Martin Kocher, and WKÖ President Harald Mahrer for the achievements in Hungary.
