On Demand

Post Euro-6 Emission Testing: How R&D Emission Testing Can Look Like


The upcoming emission regulation Post Euro-6 will affect pure ICE as well as hybrid, battery or fuel cell electric vehicles. For the development of such vehicles there are the challenges of a growing number of sample probe locations along the complex exhaust aftertreatment systems, the flow rates of extracted sample and the required floor space for additional measurement equipment.

Key takeaways:

Engine-out and mid-cat measurements at sample points with high pressures and temperatures will be necessary in addition to tailpipe sampling for all components. DPF and GPF will be needed to fulfill particle limits, requiring particle number and transient soot measurement to develop soot loading and regeneration models. Complex exhaust aftertreatment systems require a higher number of exhaust gas sampling points, so extracted samples must not affect the engine and the exhaust aftertreatment system. Frontloading and validation: To cope with RDE requirements, RDE cycles need to be run early in the development cycle, not only in chassis dynos but also in powertrain and engine testbeds.

Recording available - 60 mins
Presentation language
  • Post Euro-6 emission standards
  • Impact on vehicle development and testing
  • R&D Emission Testing

Watch now

By clicking on submit, you give consent to the use of the data you provided to process your request and to receiving communication in connection with your request/registration.
Please click here to view the AVL Privacy Policy.

Meet our experts who are the presenters of this webinar.

  • Manfred Linke (Team Leader, AVL List GmbH)
  • Kurt Engeljehringer (Principal Business Development Manager, AVL Analytical Technologies)

Hungry for more? Gain more valuable insights through additional material.

AVL - Post Euro-6 - Emission Testing for R&D - 2020-07-15g - OHNE sound
You are currently on the AVL Global Site. Click below if you would like to switch to